UCONN SFF Deposited Shapes
O N R letters fabricated from SALDVI deposition of silicon carbide into
approximately 30 micron size silicon carbide powder
The emf and temperature performance of SALD SiC/C thermocouple on a sintered
alumina substrate, compared to a type K thermocouple
SALD deposited silicon carbide/carbon thermocouple on a SALDVI silicon
carbide substrate with silicon nitride insulating layers over the thermocouple
lines
Temperature and emf performance of the SiC/C thermocouple on SALDVI SiC
substrate through several heating and cooling cycles, with comparison to
type K thermocouple performance
Multi-component thermocouple device, schematic
and actual sample
--Device fabricated by SALD and SALDVI
Temperature and emf response of multi-component
thermocouple device
--Sample was heated at the top layer by a CO2
laser, with reference temperatures monitored at
the top and bottom surfaces by K-type thermocouples
SALD Joining sample of two clay-bonded silicon carbide tubes bound together
by silicon carbide filler mateial deposited from the gas phase SALD reaction
Environmental SEM micrograph of a tube/SALD material interface, showing
the near-seamless adherence of the deposited material to the tube
1/2" Outer Diameter Silicon Carbide Clay-Bonded
Tube Joint with SALD SiC Weld Filler Material, Side and Long Views
3/8" Outer Diameter Silicon Carbide Composite
Fiber Tube Joint with SALD SiC Weld Filler Material, Side and Long Views