UConn IMS

Meet NDSEG Fellow Mason Freund

Mason Freund
Ph.D. student Mason Freund has aerospace science at the root of his research.

Since its inception in 1989, the National Defense Science and Engineering Graduate (NDSEG) Fellowship has been awarded to only 4400 students.  In that time, over 65,000 have applied.  The highly competitive fellowship, sponsored by the Air Force Office of Scientific Research (AFOSR), the Army Research Office (ARO), and the Office of Naval Research (ONR), was established by the U.S. Congress to increase the number of U.S. citizens receiving doctoral degrees in science and engineering disciplines of military importance.

Materials Science and Engineering Ph.D. candidate Mason Freund has been named a recipient of this prestigious fellowship.  IMS News spoke with Mason about his early interests in science and the catalysts and decisions leading to his being named a NDSEG Fellow.

You earned your Bachelor of Science degree in mechanical engineering with a concentration in aerospace engineering.  In your pursuit of your Ph.D. your focus remains on aerospace science.  When did you begin to be interested in aerospace science and what about aerospace science keeps you engaged? 

I think there’s always been some interest in aerospace science starting from playing with toys and enjoying sci fi movies as a kid. This steered me towards spaceships and planes and slowly evolved into interest in the sciences and engineering. Finally, being able to learn about aerospace engineering during my undergrad seemed to bring everything together. And now being a fellow under the Air Force Office of Scientific Research (AFOSR) I will be able to interact with the field on a deeper level. I am constantly learning new information and techniques that keeps the learning experience engaging but there are also always new discoveries and ideas that keep pushing the known boundaries to something that is better, faster, or stronger. I think those new discoveries and possibilities will keep me engaged for a long time.

How/when did you begin to tie materials science into your interest in aerospace science?

The mechanical engineering curriculum requires an introduction to materials science. I didn’t know what the field of materials science was or could lead to, but I quickly became interested in learning more about the field. I decided to go for a minor and take courses that could add another dimension to my curriculum and benefit my aerospace science interests.

Congratulations on being named a 2022 DoD NDSEG Fellow.  How did you come to apply for the NDSEG Fellowship and what was your reaction after learning you had been selected for the fellowship? 

My advisor (Volkan Ortalan) made me aware of some different fellowships early on in my graduate studies. After doing more research over the course of last fall, I applied to a few different fellowships. Then came a long 4-6 month wait to April when the results were expected to come out. I checked my email one night at the end of March and was surprised to see an email from NDSEG. I was then even more surprised and excited to realize it was an acceptance letter. It was the first one I got back, and I wasn’t even expecting a letter for at least another few days. I was very excited and slightly caught off guard, but it made my night and my week.

Tell us about your research and its short- and long-term implications for real-world applications. 

My group is primarily a microscopy group. We spend most time on transmission electron microscopes (TEM) in addition to other instruments and techniques. Our lab has a special ultrafast TEM which allows us to investigate reactions and dynamics at very short time scales. Specifically, my research will take advantage of these capabilities to investigate reaction dynamics of nano energetic materials to better understand behaviors from these materials as well as nanoparticle enhancement at the necessary timescales.

This work is useful for further insights into nano energetics and optimization for use in propellants and other related technologies as well as directly relating to programs within the AFOSR. The field of nano energetics plays a role in many propulsion applications as well as high power linear actuators. There are also possibilities for use in miniature applications such as micro or nano satellites. This research will provide a more fundamental understanding of the behaviors and can lead to better control, optimization, and performance of the technology.

After earning your bachelor’s degree, you chose to continue your graduate studies at UConn.  What was the catalyst for your decision?

As I mentioned, I started my minor and was taking MSE courses throughout my time in undergraduate studies. In one of the MSE courses the professor was Dr. Ortalan who is now my advisor. He asked me what I was planning on doing after graduation. I knew that I might want to go back to graduate school eventually, but I was also initially looking for jobs in industry. He mentioned about his open position for a graduate student and about the work that would be required but also the benefits and investment that it would be for my future. This really was the catalyst for my decision. I would have taken it either way but graduating in 2020 at the beginning of the pandemic and hearing about difficulties in job hiring made the decision even easier.

Cato T. Laurencin Named 2023 Priestley Medalist

from UConn Today

Dr. Cato Laurencin
Scientist and engineer, Dr. Cato T. Laurencin, has been honored for seminal and lasting research benefiting humankind.

Cato T. Laurencin, the University Professor and Albert and Wilda Van Dusen Distinguished Endowed Professor at the University of Connecticut will receive the 2023 Priestley Medal, the highest honor of the American Chemical Society.

He is recognized as the leading international figure in polymeric biomaterials chemistry and engineering who has made extraordinary scientific contributions, while at the same time he has had profound contributions to improving human health through the results of his work. While trained in polymeric chemistry, Laurencin’s overall training is broad and interdisciplinary. He received his B.S.E. in Chemical Engineering from Princeton University. He received his Ph.D. in Biochemical Engineering/Biotechnology from the Massachusetts Institute of Technology and simultaneously received his M.D., Magna Cum Laude from the Harvard Medical School. He then joined the faculty of the Massachusetts Institute of Technology and opened a polymer chemistry research laboratory. At the same time he trained and became a board certified orthopaedic surgeon.

Dr. Laurencin produced seminal work on polymeric nanofiber chemistry technology for biomedical purposes, heralding the new field. He pioneered the understanding and development of polymer-ceramic systems for bone regeneration for which the American Institute of Chemical Engineers named him one of the 100 engineers of the modern era at its Centennial celebration. In a three decade collaboration with Professor Harry Allcock at Penn State, Laurencin worked in the development of polyphosphazenes for biomedical purposes. Dr. Laurencin has had breakthrough achievements in the areas of materials chemistry and engineering of soft tissue implants for regeneration of tissue including the development of the Laurencin-Cooper (LC) Ligament for anterior cruciate ligament regeneration (knee). The development of the LC Ligament was highlighted by National Geographic Magazine in its “100 Discoveries that Changed the World” edition.

In his latest work, Dr. Laurencin has pioneered a new field, Regenerative Engineering, described as the Convergence of areas such as nanomaterials science and chemistry. His work has described the chemistry of signaling molecules for tissue regeneration and he published this work in Plos One (https://doi.org/10.1371/journal.pone.01016272014). He demonstrated the ability these molecules in combination with polymeric materials chemistry to induce tissue regeneration.  In his most recent work he has used principles of polymer chemistry to create cell-like structures. This has allowed the creation of what is being considered a new class of stem cells: synthetic artificial stem cells (SASC). The work was recently published in the Proceedings of the National Academy of Sciences.

The impact of the new field has become clear. The NIH Awarded him their highest and most prestigious award, the NIH Director’s Pioneer Award for his field of Regenerative Engineering. The NSF awarded him their most transformative grant, the Emerging Frontiers in Research and Innovation Grant (EFRI) for Regenerative Engineering. Dr. Laurencin is the Editor-in-Chief of Regenerative Engineering and Translational Medicine, a journal published by Springer Nature. He is the Founder of the Regenerative Engineering Society (now a community of the American Institute of Chemical Engineers). The American Institute of Chemical Engineers Foundation created and endowed the Cato T. Laurencin Regenerative Engineering Founder’s Award honoring Dr. Laurencin’s work and legacy in this new field. He is the first individual to receive highest distinctions across science, engineering, medicine and technology for this work. In science, he received the Philip Hauge Abelson Prize from the American Association for the Advancement of Science awarded “for signal contributions to the advancement of science in the United States”.  He was awarded both the highest/oldest honor of the National Academy of Engineering (the Simon Ramo Founders Award) and one of highest/oldest honors of the National Academy of Medicine (the Walsh McDermott Prize). And he received the National Medal of Technology and Innovation, our nation’s highest for technological achievement in ceremonies at the White House.  Most recently, he received the 2021 Spingarn Medal given for the “highest or noblest achievement by a living African American during the preceding year or years in any honorable field.”  The highest award of the NAACP, they stated “his exceptional career has made him the foremost engineer-physician-scientist in the world.”

Dr. Laurencin has also profoundly contributed to mentoring and fostering diversity. He has been responsible for the development of a generation of underrepresented engineers and scientists. In receiving the American Association for the Advancement of Science Mentor Award, it was noted that the majority of African-American faculty in bioengineering had been mentored by Laurencin. For his work in mentoring, he was honored by President Barack Obama with the Presidential Award for Excellence in Science, Math and Engineering Mentoring. Remarkably, he received the 2021 Hoover Medal given jointly by the American Institute of Chemical Engineers, the American Society of Mechanical Engineers (ASME), the American Society of Civil Engineers (ASCE), the American Institute of Mining, Metallurgical and Petroleum Engineers (AIME) and the Institute of Electrical and Electronics Engineers (IEEE), The purpose of the medal is “to recognize great, unselfish, non-technical services by engineers to humanity.” Dr. Laurencin’s extraordinary commitment to inclusion, equity and fairness along with his legendary work in mentoring lead to his selection.

Dr. Laurencin’s life, career and philosophy are contained in his recently published biography entitled “Success is What You Leave Behind,” published by Elsevier.